Overview
The new generation of the TruSystem 7500 OR Table system from Trumpf Medical sets a new standard. The larger adjustment areas of the OR table tops allow for more flexibility in patient positioning. The options of overload protection and sensor-controlled collision avoidance and recognition help to increase patient safety. Better ergonomics and time savings with the help of the simple new coupling point and motorized Shuttle for efficient patient transfer.
Advantages at a glance
Reliable in All Situations
Maximum load of 880 lbs. (400 kg) enables treatment of bariatric patients
Optimal Access
With longitudinal slide of up to 18.1 in (460 mm) and a slim column design
Simple Coupling Point System
Attaching and removing components just became much easier with the new coupling point system – a self-aligning connect and lock system
Intuitive to Operate
Permanent feedback upon every adjustment for improved communication in the OR as well as the possibility to save positions
Better Patient Transfer
The motorized Power Shuttle allows rapid patient transfer and reduces changing time
Reliable in Everyday Surgery
The tried-and-tested electromechanical drive in the tabletop and column guarantees reliable operation in everyday surgery.
Product video
Details
For optimum anatomical conditions
Patient weight capacity up to 882 lbs. (400 kg) (supine position)
Gastric banding procedures for ergonomic access to the surgery area with extensive adjustment of up to 65° in the Trendelenburg position and an optimum trend/tilt ratio
Thoracic procedures in lateral position
Lithotomy position for gynecology
Open or endoscopic shoulder surgery in beach chair position
Arthroscopic hip surgery or femoral neck fractures – Trumpf Medical Extension and MIS hip aggregate with carbon fiber struts and 360° fluoroscopy capability
Spinal surgery with large fluoroscopy area
Neurosurgical procedures for open-skull surgeries
Downloads
Technical Data
|
Versions |
TruSystem 7500 (MC) – mobile column TruSystem 7500 (SC) – stationary column TruSystem 7500 (FC) – floor mounted column |
|
Maximum load |
880 lbs (400 kg) |
|
Height adjustment |
|
|
20.1 in – 41.7 in (510 mm – 1,060 mm) |
|
19.3 in - 40.9 in (490 mm - 1,040 mm)
|
|
20.5 in – 42.1 in (520 mm – 1,070 mm) |
|
Lift |
21.7 in (550 mm) |
|
Trendelenburg/ Anti-trendelenburg |
± 45° |
|
Tilt |
± 30° |
|
Rotation stationary column |
360° (free rotation) |
|
|
|
|
Versions |
Universal table tops U26 H – two-parts, 6 motorized joints U24 H – two-parts, 4 motorized joints U14 H – one-part, 4 motorized joints |
|
Longitudinal slide |
|
|
15.7 in (400 mm) |
|
18.1 in (460 mm) |
|
Adjustment range of leg section joints |
± 105° |
|
Adjustment of lower back section joints |
|
|
+ 90° / - 55° |
|
+ 90° / - 55° |
|
+ 90° / - 105° |
|
Adjustment of upper back section joints |
|
|
+ 90° / - 105° |
|
+ 90° / - 70° |
|
|
|
|
Versions |
Special table tops ST26H – two-parts, 6 motorized joints, Trendelenburg ST14 – one-part, 4 motorized joints Trendelenburg SQ14 – one-part, 4 motorized joints transversal slide |
|
Maximum load |
793 lbs (360 kg) |
|
Longitudinal slide |
15.7 in (400 mm) |
|
Transversal slide SQ14 |
6.9 in (176 mm) |
|
Trendelenburg ST26H/ ST14 |
± 20° (additional) |
|
Adjustment range of leg section joints |
+ 90° / - 105° |
|
Adjustment of lower back section joints |
|
|
+ 90° / - 55° |
|
± 90° |
|
Adjustment of upper back section joints ST26H |
+ 90° / - 105°
|
